1995 216 instruments
1995 216 instruments
Hi all, Trying to replace some blown bulbs in the instrument cluster. surround is off, 4 screws removed from dials but it only pulls out a few inches, not enough to dis connect wiring plugs. Am i missing something
Re: 1995 216 instruments
Speedo cable??
- 220 GSi turbo
- Club Member
- Posts: 3009
- Joined: Thu Sep 20, 2007 6:48 pm
- Location: The National Forest
Re: 1995 216 instruments
Yes, assuming your car has the earlier dashboard (the change happened in 1995) it is very likely to be the speedo cable. (Later cars had an electronic speedo with no mechanical drive).
All of the earlier cars had a two part cable and the joint is in the engine bay near the fuel filter (follow the cable up from where it exits the gearbox and you will see the joint). There is a thumbwheel to unscrew which will then allow the joint to be pulled apart.
That will give you plenty of room to pull the instrument pack into the car, other than interference from the steering wheel!
All of the earlier cars had a two part cable and the joint is in the engine bay near the fuel filter (follow the cable up from where it exits the gearbox and you will see the joint). There is a thumbwheel to unscrew which will then allow the joint to be pulled apart.
That will give you plenty of room to pull the instrument pack into the car, other than interference from the steering wheel!
1995 220GSi Turbo: owned for 24 years
1994 216SLi
2000 25GTi
Daily: Honda Civic Type R GT
Previously: 216 Sprint (1988-91)216 Coupe(1993-95) 214SLi(1995-96) 420GSi Turbo L955UKV(1997-2004) 214SEi M884BMR(2004-11) 420GSi Tourer (2005-6) 214 SEi M103BCW(2011-12)
1994 216SLi
2000 25GTi
Daily: Honda Civic Type R GT
Previously: 216 Sprint (1988-91)216 Coupe(1993-95) 214SLi(1995-96) 420GSi Turbo L955UKV(1997-2004) 214SEi M884BMR(2004-11) 420GSi Tourer (2005-6) 214 SEi M103BCW(2011-12)
Re: 1995 216 instruments
Thanks fo the replies, my fault i wasn't expecting a speedo cable. Wish i had read your answer before i removed cable from gearbox end, still looking for the clip. When i find it can i attach to the cable first, before pushing cable into the box. Thanks again






